The Pfadt Rear Lower Control Arm bushings for the 2010 Camaro are designed to limit bushing deflection to maximize steering response while maintaining drivability and comfort. Utilizing lightweight 6061-T6 aluminum sleeves that are hard anodized to create incredible surface hardness and microscopic pores to hold our special grease. These sleeves are then Teflon coated to further reduce friction. This is then coupled with our graphite impregnated polyurethane bushing which uses deep grooves to hold grease and continuously re-lubricate the surfaces for long and quiet operation. The result is an ultra lightweight, ultra-low friction joint that...
Date Added: Friday 23 April, 2010 Manufacturer: Pfadt race engineering
The demand placed on the front trailing arm bushings on the 2010 Camaro are particularly high. They need to be able to support the crushing loads during braking while allowing fluid rotation from side-to-side for steering and pivot up-and-down for suspension articulation. While polyurethane can cope with a multitude of situations this was simply not one of them. This led to the development of the Pfadt Front Trailing Arm Street Spherical.
The Pfadt FTA Street Spherical is designed to allow articulation in all of the required directions for ease of steering and suspension articulation while achieving maximum stiffness during braking. To m...
Date Added: Friday 23 April, 2010 Manufacturer: Pfadt race engineering
The Pfadt Front Lower Control Arm bushings for the 2010 Camaro are designed to limit bushing deflection to maximize steering response while maintaining drivability and comfort. Utilizing lightweight 6061-T6 aluminum sleeves that are hard anodized to create incredible surface hardness and microscopic pores to hold our special grease. These sleeves are then Teflon coated to further reduce friction. This is then coupled with our graphite impregnated polyurethane bushing which uses deep grooves to hold grease and continuously re-lubricate the surfaces for long and quiet operation. The result is an ultra lightweight, ultra-low friction joint tha...
Date Added: Friday 23 April, 2010 Manufacturer: Pfadt race engineering
The Pfadt Control Arm bushings for the 2010 Camaro are designed to limit bushing deflection to maximize steering response while maintaining drivability and comfort. Utilizing lightweight 6061-T6 aluminum sleeves that are hard anodized to create incredible surface hardness and microscopic pores to hold our special grease. These sleeves are then Teflon coated to further reduce friction. This is then coupled with our graphite impregnated polyurethane bushing which uses deep grooves to hold grease and continuously re-lubricate the surfaces for long and quiet operation.
The Pfadt FTA Street Spherical is designed to allow articulation in all o...
Date Added: Friday 23 April, 2010 Manufacturer: Pfadt race engineering
Sporty Handling with factory pre-set damping
The ideal systems for customers wishing to rely on the experience of our engineers to set the damper setting, yet determine their own degree of lowering. In extensive driving tests our engineers have set the dampers for the best balance between sporty driving, comfort and safety. The user is then free to decide the best height setting for their use and preference.
•Optimally pre-set
•Sporty harmonious damping technology
•Stainless steel technology "inox-line"*
•Individually height-adjustable
•Lowering range approved by the German Technical Control Board (TÜV)
•Fully finished ...
Date Added: Friday 23 April, 2010 Manufacturer: Pfadt race engineering
State-of-the-art technology from motor sports for more performance on the road. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
•Damping technology with individually adjustable rebound- and compression technology
•inox-line* stainless steel technology
•Individually height adjustable
•Adju...
Date Added: Friday 23 April, 2010 Manufacturer: Pfadt race engineering
The factory strut in the 2010 Camaro mounts through a rubber bushing to allow articulation during suspension movement. Due to the complacence in this rubber bushing the effectiveness of the shock is reduced and ultimately traction is compromised. While the shock is free to articulate in the rubber bushing the spring is mounted to the chassis. Because the shock and spring do not articulate together there is a considerable side load produced from the spring. This side load increases friction in the shock and reduces shock life. There is also very limited camber adjustment in the front.
The Pfadt Camber Kit is your complete solution for mou...
Date Added: Friday 23 April, 2010 Manufacturer: Pfadt race engineering
More than a year after we approached Gates Racing with making a Kevlar option for a 3/S timing belt they are here! Get the added strength and quality of a Gates Racing product at an incredible price from IPS!
Incredibly strong, extremely heat resistant. Tough enough to take the worst pummeling your engine can dish out. No other belts help protect your engine and deliver high performance like Gates Racing Performance Timing Belts.
Yes, the color gives you a hot custom look. But look deeper. Constructed of HNBR elastomeric composites, Gates Racing Performance Timing Belts are 300% stronger than stock belts and deliver up to three t...
Date Added: Tuesday 16 March, 2010 Manufacturer: Gates
Live Help
